200 XK – Automatic Ignition
The result is outstanding control, dancing flames, a crystal clear view of the fire and highly efficient combustion of the fuel.
The 200 XK will happily burn most solid fuels but it will reward you with wonderful flame patterns when burning properly seasoned wood.
The 200 XK has been independently tested for use with a 12mm non-combustible hearth and is available with an external air kit to source all the stoves air supply from the outside
Integrated Stove Ignition System
What is Automatic Electric Ignition?
We have launched a new high-tech fire-lighting system. ESSE wood-burning stoves are the first in the world to use automatic electric ignition system in the home. The combustion unit ignites fire inside a wood-burning stove with the push of a button. It means an end to kindling, matches and burnt fingers.
The ingenious British-invented electronic ignition system is simple to use – load your dry logs in front of the air jet, close the door, press the remote and the lighting cycle begins.
|Available On||100 SE 200 SE and 700 SE Stoves|
|Heater Element Output||2.1kW|
|Lighting Cycle||5-8 minutes|
Why should I use Automatic Ignition?
- Clean lighting
- Solve Draught Issues
- Simple control
- No fire lighters required
- No Kindling required
- Clean Hands!
- Eco – Friendly
Automatic Electric Ignition Features
- Powerful 2.1 kW heater element for rapid lighting
- Direction of hot air is backward-facing and therefore safe
- Automatic vent to close the air supply after the lighting cycle
- Powerful fan for faster fire growth
- Short five minute lighting cycle
- Remote control
- 13Amp electrical supply
|Specifications||200 XK – Automatic Ignition|
|Construction||Steel / Cast iron|
|Flue outlet||Top or Rear|
|Flue pipe diameter||5" (125mm)|
|Overnight Burning (suitable for continuous burning)|
|Pre-heated secondary airwash|
|Boiler model – central heating / domestic HW|
|Operating range (depending on fuel type & settings) (KW)||Up to 8.5|
|Additional room vent required|
|Efficiency Test Data||200 XK|
|Output KW EN13240(ST)||8.5|
|CO Emissions Corrected to 13% O2||0.16|
|Flue temp Mean °C||244|